xsmotorcycleschool.co.uk blog

Following on from the review on Module 1 of the Practical Test the DSA are now re-arranging the deck chairs on the Titanic with some minor changes to Module 1, which are to come into use on 16th May 2011.

First off they are changing the order in which the exercises, “Elements” in DSA speak, are to be done, the intention is that all of the “slow speed” exercises will now be done together, followed by the high speed ones, presumably if the examiner is not happy with your slow riding he will not carry on with the high speed part of the test and so reduce the accident toll.

This will mean that the “Slow Ride” and the “U-Turn” exercises will now be done following the “Slalom” and “Figure 8″ exercises.

The published intention is that on the completion of the “Figure 8″ you will be asked ride across the yard to the “U-Turn” area at a walking pace and this will be observed by the examiner rather than you having to keep pace with him as at present.

Next will be the “Controlled Stop”, for this you will need to ride round the “circuit bend” at the end of the yard, but this first time round it there will be no speed requirement so it’s a chance for you to get the feel of things, and then go straight through down to stop with your wheel in the “stop box” of 4 blue cones.

The entrance to and exit from the “circuit bend” have been “altered to allow the rider to choose their preferred riding line”

Now you need to get up to speed!, it’s time for the “Emergency Stop”.

So it’s round the “circuit bend” again, but this time you need to get round it at 30kph, accelerate up to 50kph and through the speed trap and stop when the examiner raises his hand.

The official release says that they are now going to allow a 5% tolerance on that speed so it will no longer be a fail if you only do 49kph but it is a “Minor Fault”.

All that’s left to do is the swerve,   Oops!, Sorry, that’s the “Avoidance” exercise.

Round the “circuit bend” for the third time, again at 30kph, through the speed trap at 50kph (5% tolerance) and swerve through the marker cones same as always.

You have already done the “Controlled Stop” exercise so you now just need to stop safely near the cones marking the back of the box (the 2 front cones are to be removed before you start the exercise) .

Diagrams of the “New” layout can be downloaded from the “info/Practical Test/Module 1″ section of the XS main site HERE where there are both the “Old Test Layout” and the “Current Layouts” available for download.

Having regard to all the hoohooraw about Module 1  I thought you might like to see the natural follow on to it, and remember that this is being done against the clock!.

Round the Cones